Identification Identification of Work Accidents at PT. Plantation Nusantara IV Using the Job Safety Analysis Method
Identification of Work Accidents at PT. Plantation Nusantara IV Using the Job Safety Analysis Method
Keywords:
Boiler, Job Safety Analysis, Occupational Safety and Health (K3), PPE; Boiler, PTPN IVAbstract
The development of industry in Indonesia is currently taking place very rapidly along with the advancement of science and technology. The development of science and technology has made the use of production tools increasingly complex. Every year there are more than 250 workplace accidents and more than 160 million workers become ill due to workplace hazards. Based on the results of a preliminary survey at PKS PTPN IV Air Batu, by conducting observations, literature studies and interviews with employees, it is known that there were 17 work accidents based on the recapitulation data of work accidents for the 2023 period. Based on this description, the researcher chose the Job Safety Analysis method.The work station in the boiler factory area is the part that has the most potential for accidents based on the analysis of potential accident risks that occur and requires serious treatment and mitigation measures. The potential hazards include burns, gas poisoning, boiler explosions due to component failure, noise, burning by residual steam, slipping due to slippery work floors. This is because workers are very close to hot objects from the boiler, the combustion of the boiler's fuel shell and the slippery work floor. The hazard controls carried out include workers being required to use complete PPE, good ventilation, routine inspection of safety valves, periodic pressure monitoring, routine maintenance, limiting maximum pressure, preventive maintenance, sound insulation, cooling the boiler gradually, using non-slip footwear, waiting until the boiler is completely cool, using complete APD
References
[1] Saputro, PB (2019). Analysis of Potential Hazard Identification in Efforts to Prevent Work Accidents Using the Job Safety Analysis Method in the Production Process at PT Infoglobal Teknologi Semesta. Jptm, 08, 17–26.
[2] Widodo, ID, & Dwinanda, NRA (2020). Job Safety Analysis in Production Floor of PT BD Based on Semi Quantitative AS/NZS4360 Method. IOP Conference Series: Materials Science and Engineering, 722(1). https://doi.org/10.1088/1757-899X/722/1/012026
[3] Bawang, J., Kawatu, PAT, & Wowor, R. (2018). Analysis of Potential Hazards Using the Job Safety Analysis Method in the Shipping Section of the Pakal Site of PT. Aneka Tambang Tbk. UBPN North Maluku. KESMAS Journal, 7(5), 1–15.
[4] Umiyati. (2021). Analysis of Work Accidents at the Wijaya Lathe and Welding Workshop Using the Job Safety Analysis (JSA) Method with the Failure Mode and Effect Analysis (FMEA) Approach. Indonesian Scientific Journal p–ISSN: 2541-0849, 4(1), 6.
[5] Basuki, MY (2018). Job Safety Analysis Method in Workshop. Galuh Industrial Journal, 4(1), 1–11.
[6] Ilmansyah, Y., Mahbubah, NA, & Widyaningrum, D. (2020). Implementation of Job Safety Analysis as an Effort to Prevent Work Accidents and Improve Work Safety at PT Shell Indonesia. PROFISIENSI: Journal of Industrial Engineering Study Program, 8(1), 15–22.https://doi.org/10.33373/profis.v8i1.2521.
[7] Irmayani, I., Ginting, LB, Parinduri, AI, Ginting, R., Putra Samura, JA, & Nasution, ZA (2020). Job Safety Analysis Method in Controlling Work Risks at PT. Jakarana Tama, Medan Branch. Journal of Public Health and Nutrition (Jkg), 3(1), 48–55.https://doi.org/10.35451/jkg.v3i1.480
[8] Ardinal. 2023. Job Safety Analysis. Jakarta: Yong Ardinal Rhuekamp
[9] Mochamad Dwi Rizky Dharmawan, & Sulung Rahmawan Wira Ghani. (2023). Evaluation of Occupational Safety and Health in Industrial Engineering Practicum at Hasyim Asy'TMAri University Using the Job Safety Analysis Method. Journal of Research in the Field of Innovation & Industrial Management, 2(2), 17–26.https://doi.org/10.33752/invantri.v2i2.3739
[10] Pratama. (2019). K3 Risk Analysis Using the Approach. Cvl, 15–18.
[11] Pratama Rahman, MD, Priyana, ED, & Rizqi, AW (2022). Job Safety Analysis (JSA) as an Effort to Control the Risk of Work Accidents in Fabrication Work at PT. Wilmar Nabati Indonesia. Teknika Sains: Journal of Engineering Sciences, 7(2), 98–109.https://doi.org/10.24967/teksis.v7i2.1947
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Reza Adrian Purnawan, Diana Khairani Sofyan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright Notice
Authors published in this journal agree to the following terms:
1. The copyright of each article is retained by the author (s).
2. The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
3. Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work.
5. Articles and all related material published are distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
