Mechanical and Physical Properties of Bio-Briquette Produced from Gayo Arabica Coffee-Skin

Authors

  • Adi Setiawan Universitas malikussaleh
  • Juwaini Universitas malikussaleh
  • Ahmad Nayan Universitas Malikussaleh
  • Fauzan Universitas malikussaleh
  • Faisal Universitas malikussaleh

Keywords:

Gayo Arabica, Coffee skin, bio-briquettes, rate of combustion.

Abstract

Enormous amount of Gayo Arabica coffee-by-products highlights its potential as source of renewable energy. Utilizing coffee skin as a raw material for bio-briquettes is considered as an effective way to minimize their wastage as landfill. This study aims to examine the characteristics of bio-briquettes produced through the cold-forming process at a pressure of 100, 150 and 200 kg/cm2 without binder. Prior to briquetting process, the raw material was sun-dried, ground and sieved to 0.841 mm. A mixture was then made by adding water followed by molding and drying processes. Characterization of the briquette employs a number of techniques including DSC, TGA, bomb calorimeter and proximate analyses as well as mechanical testing. The results show that the calorific value of the coffee-skin briquette is 4764 cal/g containing 16.5 wt% of moisture, 12 wt.% ash. The rate of combustion is 0.019 g/s with ignition time of 196 s. Varying briquetting pressure results in a change in ignition time of bio-briquettes as the density is increased. However, no significant change was observed on the rate of combustion upon increasing the briquetting pressure. This investigation concludes the potential use of coffee industry by-product as feedstock for solid

References

Amarasekara, A., Tanzim, F. S., & Asmatulu, E. (2017). Briquetting and carbonization of naturally grown algae biomass for low-cost fuel and activated carbon production. Fuel, 208, 612–617. https://doi.org/10.1016/j.fuel.2017.07.034

ICO. (2018). International Coffee Organization: World coffee exports. Retrieved November 4, 2018, from http://www.ico.org/

Janissen, B., & Huynh, T. (2018). Resources , Conservation & Recycling Chemical composition and value-adding applications of co ff ee industry byproducts : A review, 128(September 2017), 110–117. https://doi.org/10.1016/j.resconrec.2017.10.001 Mckendry, P. (2002). Energy production from biomass (part 1 ): overview of biomass, 83(July 2001), 37–46.

Oliveira, L. S., & Franca, A. S. (2014). An Overview of the Potential Uses for Coffee Husks. Coffee in Health and Disease Prevention. Elsevier Inc. https://doi.org/10.1016/B978-0-12-409517-5.00031-0

Singh, Y. D., Mahanta, P., & Bora, U. (2017). Comprehensive characterization of lignocellulosic biomass through proximate, ultimate and

compositional analysis for bioenergy production. Renewable Energy, 103, 490–500. https://doi.org/10.1016/j.renene.2016.11.039

Yaman, H. H.-A. and S. (2010). Production of Smokeless Bio-briquettes from Hazelnut Shell. In Proceedings of the World Congress on Engineering and Computer Science (Vol. II, pp. 20–22).

Downloads

Published

2018-12-31